Avantco 177MX60H 사용자 설명서 - 페이지 5

{카테고리_이름} Avantco 177MX60H에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 177MX60H 12 페이지. Gear driven 60 qt. commercial mixer

페이지 인쇄
Avantco 177MX60H 사용자 설명서

REMOVAL AND REFITTING INSTRUCTIONS MIXER SAFETY GUARD

1. To remove the wire guard adjust the position to align the edge of the wire guard with the single indentation marker on the
fixed rear guard. See figure 1.
2. Remove the rubber closing caps from the mounting screws as in the indicated positions. Remove the screws. See figure 2
and 3.
3. Turn the wire guard until the edge of the wire aligns with two indentation markers on the fixed rear guard. See figure 4.
4. Remove the cap and mounting screw in the indicated position. See figure 5.
5. Ensure that all rubber caps are fitted properly into the screw heads. See figure 6.
6. To replace the wire guard after cleaning repeat the instructions above in reverse.
www.AvantcoEquipment.com
Figure 1
Figure 2
Figure 4
Figure 6
User Manual
Figure 3
Figure 5
5