Makita 3612BR 사용 설명서 - 페이지 8
{카테고리_이름} Makita 3612BR에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3612BR 13 페이지. Guide rail adaptor
Makita 3612BR에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)
페이지 인쇄
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps. Take
out the worn carbon brushes, insert the new ones and
secure the brush holder caps.
005062
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers, always
using Makita replacement parts.
OPTIONAL ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Straight & groove forming bits
•
Edge forming bits
•
Laminate trimming bits
•
Straight guide
•
Trimmer guide assembly
•
Guide holder
•
Templet guide 25
•
Templet guides
•
Templet guide adapter
•
1. Limit mark
1
1. Brush holder cap
1
2. Screwdriver
2
or
attachments
Only use
accessory or
Lock nut
•
Collet cone 12 mm, 1/2"
•
Collet sleeve 3/8", 1/4"
•
Collet sleeve 6 mm, 8 mm, 10 mm
•
Wrench 8
•
Wrench 24
•
are
8