Makita 3612C 사용 설명서 - 페이지 9
{카테고리_이름} Makita 3612C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3612C 20 페이지. Guide rail adaptor
Makita 3612C에 대해서도 마찬가지입니다: 부품 분석 (3 페이지), 사용 설명서 (16 페이지)
페이지 인쇄
1
2
55 mm
( 2-3/16" )
55 mm
3
( 2-3/16" )
1. More than 15mm (5/8")
2. Straight guide
3. Wood
3
1. Templet guide
2. Screw
3. Base plate
1. Templet guide
2. Lock plate lever
Wider straight guide of desired dimensions may be made by using the conven-
003684
ient holes in the guide to bolt on extra pieces of wood.
When using a large diameter bit, attach pieces of wood to the straight guide
which have a thickness of more than 15 mm to prevent the bit from striking the
straight guide.
When cutting, move the tool with the straight guide flush with the side of the
workpiece.
Templet guide (optional accessory)
003688
The templet guide provides a sleeve through which the bit passes, allowing
use of the tool with templet patterns.
For tool without lock plate
To install the templet guide, loosen the screws on the tool base, insert the tem-
003692
plet guide and then tighten the screws.
1
2
For tool with lock plate
To install the templet guide, pull the lock plate lever and insert the templet
005072
guide.
1
2
9