Garage Smart UNIVERSAL LIFTER 설치 및 사용자 설명서 - 페이지 13

{카테고리_이름} Garage Smart UNIVERSAL LIFTER에 대한 설치 및 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Garage Smart UNIVERSAL LIFTER 20 페이지.

4. Hold the Smart Track in place over the pilot hole you drilled and screw in one of the

included lag screws and washers. Do not screw it in all the way so you can still move

the other end of the track.

5. Use the stud center method to find the center of the joist where you will secure the

other end of the Smart Track.

6. Using the Smart Track as your guide, drill a pilot hole on the opposite side at least

three inches into the center of the joist.

7. Use a wrench to screw in a lag screw and washer into the pilot hole you just drilled.

Be sure to tighten both lag screws so the Smart Track is flush and secure against

the ceiling.

Whenever possible, use two lags screws in each section of Smart Track to

ensure a secure installation.

Failure to mount the Smart Track and the Universal Lifter to secure ceiling joists

or rafters could result in property damage, serious personal injury, or death.

NOTICE

WARNING