Avantco 224BHAC63 사용자 설명서 - 페이지 5

{카테고리_이름} Avantco 224BHAC63에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco 224BHAC63 9 페이지.

User Manual

Refrigerator Control

set

Running a Manual Defrost Cycle

This unit is pre-programmed to run automatic defrost cycles at preset intervals. However, if you

would like to run a manual defrost cycle at any time, please follow the steps below:

Refrigerators: Press the defrost button (snowflake symbol and down arrow) for approximately 3

seconds. Repeat to stop the defrost cycle.

Defrost System

Refrigerator coils are kept below the freezing point (32 degrees Fahrenheit). During compressor

down-time, the evaporator fan continues to circulate air through the evaporator coil. This air

circulation raises the coil temperature above the freezing point, melting any accumulated frost.

Run-off water is drained into the evaporator pan and evaporated. Automatic defrost timers

automatically initiate at pre-set intervals and for a pre-determined duration.

Operation/Maintenance

NOTE: We strongly recommend that any servicing be performed by an authorized service technician.

• Do not block the air duct / fan at the top of the unit. Maintain a minimum of 4" of clearance

between products and the fan at all times. Do not block return air flow in the front of the unit.

• Ensure all shelves are sitting level and properly secured before loading products.

• Do not store flammable and explosive gas or liquids inside the unit.

Cleaning the Condensor Coil

• For efficient operation, keep the condenser surface free of dust, dirt, and lint.

- 5 -