Makita 3620 사용 설명서 - 페이지 8
{카테고리_이름} Makita 3620에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3620 20 페이지. Router
Makita 3620에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사용 설명서 (17 페이지), 사용 설명서 (17 페이지), 사용 설명서 (18 페이지)
페이지 인쇄
Straight guide (optional accessory)
The straight guide
i s
effectively used for
straight cuts when chamfering or grooving.
To install the straight guide, insert the
guide bars into the holes in the tool base.
Adjust the distance between the bit and
the straight guide. At the desired distance,
tighten the wing bolts to secure the straight
guide in place.
1
J
When cutting, move the tool with the straight guide flush with the side of the workpiece.
If the distance (A) between the side of the
workpiece and the cutting position
is too
wide for the straight guide, or if the side
of the workpiece i s not straight, the
straight guide cannot be used.
In
this
case,
firmly clamp
a
straight board to the work-
piece and use
it
as a guide against the
router base. Feed the tool in the direction
of the arrow.
8