Makita 3620 사용 설명서 - 페이지 4

{카테고리_이름} Makita 3620에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3620 17 페이지. Router
Makita 3620에 대해서도 마찬가지입니다: 사용 설명서 (20 페이지), 사용 설명서 (13 페이지), 사용 설명서 (17 페이지), 사용 설명서 (18 페이지)

페이지 인쇄

Power tool use and care

18. Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

19. Do not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

20. Disconnect the plug from the power source

and/or the battery pack from the power tool

before making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

21. Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions to

operate the power tool. Power tools are

dangerous in the hands of untrained users.

22. Maintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool's operation. If damaged, have the

power tool repaired before use. Many accidents

are caused by poorly maintained power tools.

23. Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

24. Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from those intended

could result in a hazardous situation.

Service

25. Have your power tool serviced by a qualified

repair person using only identical replacement

parts. This will ensure that the safety of the power

tool is maintained.

26. Follow

instruction

changing accessories.

27. Keep handles dry, clean and free from oil and

grease.

ROUTER SAFETY WARNINGS

Hold power tools by insulated gripping

surfaces when performing an operation where

the cutting tool may contact hidden wiring or

its own cord. Contact with a "live" wire will make

exposed metal parts of the tool "live" and shock

the operator.

Use clamps or another practical way to secure

and support the workpiece to a stable platform.

for

lubricating

and

GEB018-2

Holding the work by hand or against your body

leaves it unstable and may lead to loss of control.

Wear hearing protection during extended

period of operation.

Handle the bits very carefully.

Check the bit carefully for cracks or damage

before

operation.

damaged bit immediately.

Avoid cutting nails. Inspect for and remove all

nails from the workpiece before operation.

Hold the tool firmly with both hands.

Keep hands away from rotating parts.

Make sure the bit is not contacting the

workpiece before the switch is turned on.

10. Before using the tool on an actual workpiece,

let it run for a while. Watch for vibration or

wobbling

that could

installed bit.

11.

Be careful of the bit rotating direction and the

feed direction.

12. Do not leave the tool running. Operate the tool

only when hand-held.

13. Always switch off and wait for the bit to come

to a complete stop before removing the tool

from workpiece.

14. Do not touch the bit immediately after

operation; it may be extremely hot and could

burn your skin.

15. Do not smear the tool base carelessly with

thinner, gasoline, oil or the like. They may

cause cracks in the tool base.

16. Draw attention to the need to use cutters of the

correct shank diameter and which are suitable

for the speed of the tool.

17. Some material contains chemicals which may

be toxic. Take caution to prevent dust

inhalation and skin contact. Follow material

supplier safety data.

18. Always use the correct dust mask/respirator

for the material and application you are

working with.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

Replace

cracked

indicate improperly