Avantco Equipment 177SL612A 사용자 설명서 - 페이지 9

{카테고리_이름} Avantco Equipment 177SL612A에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco Equipment 177SL612A 16 페이지. Meat slicer
Avantco Equipment 177SL612A에 대해서도 마찬가지입니다: 사용자 설명서 (16 페이지)

페이지 인쇄
Avantco Equipment 177SL612A 사용자 설명서
1.
Fold a cloth wipe that has been submerged in fresh detergent solution and
work it between the ring guard and the knife, starting at the base of the ring
guard. Carefully work the cloth around the knife, cleaning the edge of the ring
guard and edge of the gauge plate.
2.
Sanitize and allow to dry.
1.
Clean the machine body with a damp
cloth or a sponge rinsing frequently
with hot water and cleaning solution.
Rinse with hot water. Sanitize and let air
dry.
2.
Clean also the gauge plate and
the indexing knob. While doing this
operation pay attention to the knife.
Don't open the gauge plate or you risk
to be cut!
The components contained in the base do not need any special cleaning;
occasionally remove the dust that can accumulate in the end area of the carriage
and of the thickness plate regulation.
1. Make sure the sharpener knob at the base of the sharpener is loose
(about 10 turns).
2. Insert the sharpener as shown in the picture until it stops at its correct position
and screw the knob.
www.AvantcoRefrigeration.com 9
www.Avantco.com
User Manual
User Manual
9