Makita 3707 사용 설명서 - 페이지 2
{카테고리_이름} Makita 3707에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3707 16 페이지. Trimmer
Makita 3707에 대해서도 마찬가지입니다: 사양 (2 페이지), 사용 설명서 (10 페이지), 사용 설명서 (13 페이지)
페이지 인쇄
SPECIFICATIONS
Collet chuck capacity
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
SYMBOLS
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
..................Only for EU countries
Do not dispose of electric equipment
together
material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned
compatible recycling facility.
Intended use
The tool is intended for flush trimming and profiling of
wood, plastic and similar materials.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
2
Model
-1
)
Overall length
Net weight
Safety class
with
household
equipment
to
an
environmentally
3707/3707F
6 mm or 1/4"
END201-2
For Model 3707/3707F
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 82 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
waste
For Model 3707FC
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 76 dB (A).
and
its
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
– Wear ear protection. –
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized documents, EN60745, EN55014, EN61000 in
accordance with Council Directives, 89/336/EEC, 98/37/
EC.
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
35,000
204 mm
1.2 kg
/II
2
.
2
.
Yasuhiko Kanzaki CE 2005
Director
3707FC
6 mm or 1/4"
26,000
204 mm
1.2 kg
/II