CORNING LSE 사용 설명서 - 페이지 6

{카테고리_이름} CORNING LSE에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING LSE 8 페이지. Low speed orbital shaker

6.0 Maintenance and Cleaning

No routine maintenance or lubrication is required.

It is recommended that the shaker be kept clean to ensure a long, trouble-free operation.

The outside housing of the platform shaker may be cleaned with a soft, damp cloth when

needed. Do not use any aggressive or abrasive cleaners (acetone, nitro, polish, etc.), as they

may permanently damage the shaker finish.

Before cleaning the shaker, always unplug the power cord from the wall socket.

Make sure the shaker is switched off before installing an additional platform.

Corning Incorporated (Corning) warrants that this product will be free from defects in

material and workmanship for a period of two (2) years from date of purchase. CORNING

DISCLAIMS ALL OTHER WARRANTIES WHETHER EXPRESSED OR IMPLIED, INCLUDING ANY

IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE.

Corning's sole obligation shall be to repair or replace, at its option, any product or part thereof

that proves defective in material or workmanship within the warranty period, provided the

purchaser notifies Corning of any such defect. Corning is not liable for any incidental or

consequential damages, commercial loss, or any other damages from the use of this product.

This warranty is valid only if the product is used for its intended purpose and within the

guidelines specified in the supplied instruction manual. This warranty does not cover damage

caused by accident, neglect, misuse, improper service, natural forces, or other causes not

arising from defects in original material or workmanship. This warranty does not cover motor

brushes, fuses, light bulbs, batteries, or damage to paint or finish. Claims for transit damage

should be filed with the transportation carrier.

In the event this product fails within the specified period of time because of a defect in

material or workmanship, contact Corning's Customer Service at 800.492.1110. Outside the

United States, call +1.978.442.2200 or contact your local Corning sales office.

Corning Customer Service will help arrange local service where available or coordinate a return

authorization number and shipping instructions. Products received without proper authorization

will be returned. All items returned for service should be sent postage prepaid in the original

packaging or other suitable carton, padded to avoid damage. Corning will not be responsible for

damage incurred by improper packaging. Corning may elect for onsite service for larger equipment.

Some states do not allow limitation on the length of implied warranties or the exclusion

or limitation of incidental or consequential damages. This warranty gives you specific legal

rights. You may have other rights which vary from state to state.

No individual may accept for, or on behalf of Corning, any other obligation of liability, or

extend the period of this warranty.

CO R N I N G L S E LO W S P E E D O R B I TA L S H A K E R