Avantco Equipment S600 사용자 설명서 - 페이지 2

{카테고리_이름} Avantco Equipment S600에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco Equipment S600 4 페이지. Souple kettle warmer, 14 quart

User Manual

Specifications

Model: S600

Capacity: 14qt

Electrical: 110V, 60 Hz; 600W

Read and understand all instructions before using

this appliance. CAUTION! HOT SURFACE!

Warnings

• This appliance is designed for commercial use only.

• This appliance must be placed on a level surface.

• Do not leave this appliance unattended while it is in use.

• Never immerse the appliance in water.

• Do not operate the kettle while it is empty.

• Do not overfill the appliance with water.

• Never move or carry the kettle when it is "ON" or if it is full of hot liquids.

• Do not attempt to repair or replace the power cord if it becomes damaged. Contact a qualified service agent.

• Be careful not to touch any hot surfaces. Make sure the power cord does not come in contact with any hot surfaces.

Operation

Carefully unpack the soup kettle warmer and inspect

it for damage.

• Place the warmer on a solid, level surface.

• Use with wet heat only. Add 24 oz. (.7 liters) of water to the kettle before placing the bain marie insert into the warmer.

Never over-fill with water. Under no circumstances should the bain marie float, even when empty. Remove any excess

water immediately.

• Turn the warmer on. The indicator light will glow, showing that the unit is on. Adjust the temperature control dial to the

correct setting:

a: Settings 8-12 are designed for initial warm-up

b: Normal control settings range from 1-8

c: Once the kettle has reached the desired temperature, adjust the temperature control dial to a lower setting. It is

recommended that the lowest possible setting that maintains food-safe serving temperatures be used.

Note: This soup kettle warmer is not designed to cook soups or sauces, nor is it designed to

rethermalize cold or frozen products.

• Always keep the hinged lid attached and closed when not serving.