Makita 3901 사용 설명서 - 페이지 6
{카테고리_이름} Makita 3901에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3901 16 페이지. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Makita 3901에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 사용 설명서 (12 페이지), 사용 설명서 (17 페이지)
페이지 인쇄
Fence
The angle of the fence can be adjusted between 0' and
90'
(positive stops at Oo,
45'
and g o o ) . To adjust the angle, loosen the lock lever and tilt the fence until the pointer
points to the desired graduation on the angle scale. Then tighten the lock lever to secure
the fence. When the fence is set at
90°,
both the distance from the center of the blade
thickness t o the fence and the distance from the center of the blade thickness to the
bottom of the base are 10 mm (0.4").
Fence
Lock lever
I
Anale scale
I
Pointe!
Lock lever
/ l l - - l
10
mm
(0.4")
Center of blade thickness
Set plate
Use the set plate as shown below when cutting slots in thin workpieces.
Lock lever
Pointer,
/
11-
1
Set plate
set plate:
base
Center of blade thickness
Switch action
To
start the tool, slide the switch lever
toward the "ON" position.
To stop the tool, simply depress the " O F F
side of the switch lever.
The switch lever will return to the " O F F
position.
Set pl
Switch lever
i=-:il
/
CAUTION:
I
Before plugging in the tool, always check to see that the switch actuates properly and
returns to the " O F F position when the " O F F side
of
the switch lever is depressed.
If
not, then have it repaired by a qualified repair facility before use.
6