Makita 3901 사용 설명서 - 페이지 8

{카테고리_이름} Makita 3901에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 3901 12 페이지. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Makita 3901에 대해서도 마찬가지입니다: 브로셔 (1 페이지), 사용 설명서 (16 페이지), 사용 설명서 (17 페이지)

페이지 인쇄

004590

Clamp one workpiece to the workbench with the

mitered edge facing up.

For Frame Joint and Edge-To-Edge Joint only

004591

004592

Clamp one workpiece to the workbench.

Set the depth of cut according to the size of biscuit

to be used. Refer to the table in the "Adjusting the

depth of cut" section.

Adjust the angle guide height so that the blade is

centered in the board thickness.

Align the center mark on the base with the pencil

line on the workpiece.

004593

1. For Frame Joint

1. For

Edge-To-Edge

Joint

Switch on the tool and gently push it forward to

extend the blade into the workpiece.

Gently return the tool to the original position after

the adjusting screw reaches the stopper.

For Corner Joint and T-Butt Joint only

004594

004595

Clamp the horizontal workpiece to the workbench.

For Miter Joint only

004596

Clamp the other workpiece to the workbench with

the mitered edge facing up.

For Frame Joint and Edge-To-Edge Joint only

004597

1. For Corner Joint

1. For T-Butt Joint

1. For Frame Joint