Makita 4302C 사용 설명서 - 페이지 6
{카테고리_이름} Makita 4302C에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4302C 16 페이지. Electronic jig saw
페이지 인쇄Installing universal shank jig saw blade
CAUTION :
Always be sure that the tool is switched off and unplugged before installing or removing
the blade.
If the universal blade clamp is used, you
can use blades of other makes which have
a
universal shank like the one shown in
the figure, with a blade width of 6.35 mm
(1 /4").
Insert the blade into the blade holder as far
as
it
will go. Make sure that the end of the
blade shank reaches the bottom of the
inner s l i t and tighten the bolt securely with
the hex wrench.
T h e end
of
t h e
blade
shank should reach t h e
6