Makita 4304 사용 설명서 - 페이지 6

{카테고리_이름} Makita 4304에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4304 20 페이지. Variable speed
Makita 4304에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)

페이지 인쇄
Makita 4304 사용 설명서
Installing or removing the saw
blade
CAUTION:
Always be sure that the tool
is
switched off and unplugged before installing or removing
the blade.
To install the blade, loosen the screw on
With the blade teeth facing forward, insert
1
the blade into the blade holder as far as
it
will go. Make sure that the back edge of
the blade fits properly in the groove of the
roller. Then firmly tighten the screw to
secure the blade.
2
-
Jig saw balde
P
Roller
.Screw
c
CAUTION :
*Always secure the blade firmly. Insufficient securing of the blade may cause blade
breakage or serious injury.
Always clean out the blade holder before installing the blade. Chips or foreign matter on
the blade holder may cause insufficient securing of the blade.
*Use a lubricant or cutting oil between the blade and roller when cutting iron or com-
position board, etc. Failure to do so will shorten the service life of your blade and roller
or lead to potentially dangerous blade breakage.
6