Makita 4305 사용 설명서 - 페이지 13
{카테고리_이름} Makita 4305에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4305 20 페이지. Variable speed
Makita 4305에 대해서도 마찬가지입니다: 사용자 설명서 (8 페이지)
페이지 인쇄
Guide rule (rip fence; optional accessory)
When cutting widths of under
150
mm
(5-29/32")
repeatedly, use of the guide
rule will assure fast, clean, straight cuts. To
install
it,
loosen the bolt on the front of
the base. Slip in the guide rule and secure
the bolt.
Circular guide (optional accessory)
Use of the circular guide insures clean,
smooth cutting of circles under 200 mm
(7-7/8") in radius. Insert the pin through
the center hole and secure it with the
threaded knob. Move the base of the tool
fully forward. Then install the circular
guide on the base in the same manner as
the guide rule (rip fence).
Vacuum head (optional accessory)
The vacuum head is recommended to per-
form clean cutting operations. Install the
plastic cover on the tool by fitting
it
into
the notches in the tool.
Guiderule-
u
Pin
Fit into notches
Base
Plastic cover
13