Garage Tek GT7008A 설치 매뉴얼 - 페이지 14
{카테고리_이름} Garage Tek GT7008A에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garage Tek GT7008A 16 페이지. Garage overhead storage racks
STEP 5:
4FT X 6FT ATTACHING & FASTENING GRID PANELS TO RAILS
SCREW
1.
HANG THE GRID PANEL ASSEMBLY. GRID PANEL CORNERS FIT INTO THE BOTTOM CORNER RAIL HOOK AT 4
CORNERS AND FASTEN WITH SCREWS AND TIGHTEN WITH ALLEN KEY.
2.
CHECK AND TIGHTEN ALL CONECTIONS, TIGHTEN SCREWS AND NUTS.
3.
ATTACHED THE GARAGETEK DOME LABELS TO THE GRID PANELS
DOME
LABEL
WARNING: CHOKING HAZARD
THESE PRODUCT CONTAINERS SMAL PARTS THAT MAY CAUSE CHOKING IF SWALLOWED. KEEP ALL SMALL PARTS AWAY FROM CHILDREN.
* READ ALL INSTRUCTIONS COMPLETELY AND UNDERSTAND BEFORE STARTING INSTALLATION. PLEASE CONTACT A PROFESSIONAL INSTALLER
IF YOU ARE UNSURE OF ANY PART OF THIS INSTALLATION.
* INSPECT YOU GARAGE CEILING'S CONDITION. THE CEILING MUST BE CAPABLE TO SUPPORT THE WEIGHT OF THE OVERHEAD STORAGE RACK
AND ITEMS ON IT. REINFORCE THE CEILING AS NEEDED.
* THESE PRODUCTS ARE INTENDED FOR UNDAMAGED AND REGUALATED SIZED WOOD JOISTS & SOLID CONCETE CEILINGS ONLY. 4FT X 4FT RACK,
MAXIMUM UNIFORM LOAD IS 350LBS/ 158KG. 4FT X 8FT RACK, MAXIMUM UNIFORM LOAD IS 600LBS/ 270KG.
* USE PROPER TOOLS. THIS INSTALLATION WILL REQUIRED AT LEAST 2 PEOPLE. IF THIS INSTALLATION IS NOT PROPERLY OR FAILURE TO INSTALL
PROPERLY WILL RESULT IN PERSONAL INJURY , DEATH AND OR PROPERTY DAMAGE.
* CHECK ALL CONNECTIONS AND RETIGHTEN FASTENERS EVERY 2 MONTHS DUE TO VIBRATION AND WEATHER CONDITIONS.
* THESE PRODUCTS AR E FOR INTERIOR USE ONLY. DO NOT USE THESE PRODUCTS FOR OUTDOOR WHICH WILL LEAD TO PERSONAL INJURY,
DEATH AND OR PROPERTY DAMAGE.
THESE INSTALLATIONS WILL REQUIRE AT LEAST (2) PEOPLE
4FT X6FT RACK
SCREW
ALLEN KEY
PAGE 14