Makita 4329 기술 정보 - 페이지 2
{카테고리_이름} Makita 4329에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4329 7 페이지. Jig saw
Makita 4329에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 사양 (2 페이지), 사용 설명서 (13 페이지), 사용 설명서 (13 페이지), 사용 설명서 (13 페이지)
페이지 인쇄
R
epair
CAUTION: Unplug the machine and remove the jig saw blade from the machine for safety
before repair/ maintenance in accordance with the instruction manual!
[1] NECESSARY REPAIRING TOOLS
Code No.
1R269
Bearing extractor
1R291
Retaining ring S and R pliers
[2] LUBRICATION
Apply 7g in total of Makita grease N. No.1 to the portions designated with gray arrows and a little amount of that to
the portions designated with the white arrows to protect parts and product from unusual abrasion.
Fig. 1 (4326, 4326M, 4327, 4327M, M438)
Contact surface of
Thrust plate and Bearing case
complete
Contact surface of
Thrust plate and Balance plate
Fig. 2 (4328, 4329, M439)
Contact surface of Pin 3 and Balance plate
Contact surface of Balance plate
and Gear complete
Large oval hole of
Balance plate where
the cylinder of Gear
complete contacts
Contact surface of
Push plate and
Bearing case complete
Description
Large oval hole of Balance plate where
the cylinder of Gear complete contacts
Contact surface of Collar sleeve
and Slider
Removing Bearing case complete from Armature ass'y
Removing Ball bearings 627LLB and 608DDW
Removing retaining rings
Contact surface of Pin 3 and Balance plate
Contact surface of Collar sleeve
and Slider
Contact surface of Push plate
and Balance plate
Use for
Contact surface of Pin 3
and Balance plate
P 2 / 7