ALIBI ALI-NS4036RE 빠른 설치 매뉴얼 - 페이지 5
{카테고리_이름} ALIBI ALI-NS4036RE에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ALIBI ALI-NS4036RE 6 페이지. 6mp 270 ft ip bullet camera
페이지 인쇄
2.
After adjusting the camera for the preferred field of view, click the Setup tab, and then click the
Image link in the left frame.
Adjust the Brightness Contrast, Saturation and Sharpness of the image as follows.
Image Adjustment submenu (see above): Adjust the Saturation, Hue, Brightness,
—
Contrast and Sharpness of the video image. Each parameter can be set to a level of
0 ~ 100 either by moving the slider or entering the value in the box on the right. The
effect of the adjustment will appear in the Live View image in the menu.
3.
Open the other submenus on this screen. Adjust the following as needed. Refer to the Camera
Firmware User Manual for your camera for additional information about parameter settings.
Exposure Settings submenu: In this submenu, set the following for the best
—
performance:
Iris Mode: Select Auto or Manual. Some cameras may not offer both options.
Exposure Time: Value ranges from 1/3 to 1/100,000 s. The nominal value is 1/150.
Adjust it according to the lightening condition.
Gain: Set the gain to show the optimal brightness level.
Switch Day and Night: Select either Auto-Switch, Scheduled-Switch, or
—
Triggered by Alarm Input.
If using Auto-Switch, open the Day/Night Switch submenu to select the
Sensitivity, Filtering Time, and Smart IR feature ON or OFF.
If using Scheduled Switch, set the Start Time and End Time of the switch, then
open the Day/Night Switch submenu to select the Smart IR feature ON or OFF.
Also, click the Common, Day and Night tabs to set the Saturation, Hue, Brightness,
Contrast and Sharpness for Day and for Night modes.
Day/Night Switch submenu: You can set the Day/Night switch to Day, Night, Auto, or
—
Schedule. The option you select determines the submenu options.
Day or Night: These options both have one parameter: Smart IR.
Auto: If you select Auto switch, you can set the sensitivity (0 .. 7), filtering time and
Smart IR.
Schedule: Use Schedule to set that Start Time and End Time for the switch. Smart
IR is also selectable.
Backlight Settings: Backlight settings include BLC Area (Off, Up, Down Left Right
—
Center), the area to control, and WDR (Wide Dynamic Range) ON or OFF.
White Balance: White Balance selection is used to correct colors in the image
—
depending on the lighting source. You can also set the white balance manually (MWB),
using Automatic White Balance (AWB1), and lock the white balance setting (Locked WB).
Image Enhancement: Options in this submenu include Digital Noise Reduction (DNR)
—
ON or OFF. If ON, you can also adjust the level of noise reduction.
Video Adjustment: Video Adjustment includes:
—
Mirror: Mirror adjustment enables you to flip the image (Up/Down), flip Left/Right
(reflect or Center).
Rotate: Rotate rotates the image +90 degrees. Rotate and Mirror can be used to
adjust the image in any orientation.
Video Standard: Select 60 Hz for NTSC format.
Capture Mode: To make a complete use of the 16:9 aspect ratio, you can enable the
capture mode when you use the camera in a narrow view scene.
Other: Options in this menu depend on the features of the camera.
—
5
www.observint.com
Specifications
Camera
ALI-NS4036RE
Image Sensor:
1/2.4" Progressive Scan CMOS
Min. Illumination:
Color: 0.008 Lux @ (F1.2, AGC ON), 0.014 Lux @ (F1.6, AGC ON)
Shutter time:
1/3 s to 1/100,000 s
Slow shutter:
Supported
Lens, FOV:
4 mm, horizontal FOV: 80°, vertical FOV: 51°, diagonal FOV: 101°
Lens Mount:
M12
Aperature
F1.6
3-Axis Adjustment
Pan: 0° to 360°, tilt: 0° to 90°, rotate: 0° to 360°
Range:
Wide Dynamic Range:
120 dB
Digital noise reduction:
3D DNR
Compression Standard
Main stream: H.265/H.264
Video Compression
Sub stream: H.265/H.264/MJPEG
Third stream: H.265/H.264
H.264 Type
Main Profile/High Profile
H.264+
Main stream supported
H.265 Type
Main Profile
H.265+
Main stream supported
Video bit rate:
32 Kbps~16 Mbps
Image
Max. Image Resolution:
3072 × 2048
50 Hz: 20 fps (3072 × 2048, 3072 × 1728, 2944 × 1656), 25 fps (2560 × 1440, 1920 × 1080,
1280 × 720)
Main Stream:
60 Hz: 20 fps (3072 × 2048, 3072 × 1728, 2944 × 1656), 30 fps (2560 × 1440, 1920 × 1080,
1280 × 720)
50 Hz: 25 fps (640 × 480, 640 × 360, 320 × 240)
Sub Stream:
60 Hz: 30 fps (640 × 480, 640 × 360, 320 × 240)
50 Hz: 25 fps (1280 × 720, 640 × 360, 352 × 288)
Third Stream:
60 Hz: 30 fps (1280 × 720, 640 × 360, 352 × 240)
Image Enhancement:
BLC/3D DNR/HLC
Rotate Mode, Saturation, Brightness, Contrast, Sharpness and White Balance adjustable by
Image Settings:
client software or web browser
Region of Interest (ROI):
Support 1 fixed region for each stream and sub-stream separately
Day/Night Switch:
Day / Night / Auto / Schedule
Network
Network Storage
Support microSD / SDHC / SDXC card up to 128GB local storage, NAS (NFS,SMB/CIFS), ANR
Motion Detection, Tampering Alarm, Network Disconnected, IP Address Conflict, Illegal Login,
Alarm Trigger
HDD full, HDD error
TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP,
Protocols:
SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
One-key reset, anti-flicker, three streams, heartbeat, mirror, password protection, privacy
General Functions
mask, Watermark, IP address filtering
System Compatibility:
ONVIF (Profile S, Profile G), ISAPI
Simultaneous live view
Up to 6 channels
Up to 32 users
Host / User
3 levels: Administrator, Operator and User
Client
Alibi Central Management Software (ACMS) ver. 3.1 or later
Plug-in required live view:
Web Browser
Microsoft® Internet Explorer® (IE) 8+, Safari® 8.0-11
Plug-in free live view
Interface
Communication
1 RJ-45 10M/100M self-adaptive Ethernet port
Interface:
In-camera storage:
Built-in microSD / SDHC / SDXC slot, up to 128GB
Reset button
Yes
Smart Features
Line crossing detection, Intrusion detection, Unattended baggage detection, Object removal
Behavior Analysis
detection
Exception Detection
Scene change detection
Face Detection
Yes
© 2019 Observint Technologies. All rights reserved.