Makita 4340FCT 기술 정보 - 페이지 3

{카테고리_이름} Makita 4340FCT에 대한 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4340FCT 16 페이지. Jig saw
Makita 4340FCT에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 사양 (2 페이지), 부품 분석 (3 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

epair

< 2 > Disassembling tool opener

1. Separate base from the jig saw unit by unscrewing hex socket head bolt M5x18. See Fig. 1.

2. Unscrew pan head screw M4. Then tool opener and torsion spring 6 can be disassembled. See Fig. 1A.

< 3 > Assembling tool opener

1. Put torsion spring 6 into tool opener . And fasten tool opener with pan head screw M4. See Fig. 1A above.

2. Bring the tail of torsion spring 6 which is extruding from tool opener, to the original position by turning it

clockwise. See Fig. 2.

Gear

housing

Blade holder

Bottom view

(View from blade holder side)

< 4 > Disassembling handle section (Model 4340T / 4340CT / 4340FCT)

1. Separate handle R from handle L by unscrewing the following screws. See Fig. 3.

1 pc. of tapping screw 4x40,

1 pc. of tapping screw M4x50

5 pus. of tapping screws 4x8.

1 pc. of tapping screw M4x50

1 pc. of tapping screw 4x40,

Base

Hex socket head bolt M5x18

Fig. 1

Tool opener

The tail of

torsion spring 6

Gear housing cover

< Note in disassembling >

Handles R and L have spikes respectively for fixing on motor housing.

Be careful, not to break them, when disassembling.

5 pus. of tapping screws 4x8.

Fig. 2

Handle L

Fig. 3

Torsion spring 6

Tool opener

Pan head screw M4

Fig. 1A

The tail of torsion spring 6 pushed

into the original position.

P 3 / 16

Handle R