HIKVISION DS-7208HQI-K2 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} HIKVISION DS-7208HQI-K2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-7208HQI-K2 17 페이지.

페이지 인쇄

1 3

S E T U P R E C O R D I N G ( c o n t i n u e d )



 Motion Detection Areas

To define the image areas that Motion Detection will monitor for each camera, do the following:

Go to MENU > RECORDING CONFIGURATION > MOTION DETECT.

Use Camera pull-down menu to select camera to configure.

Check the Enable Motion Detection checkbox to enable motion detection.

Use the Sensitivity boxes to select how responsive the detection should be (the more green

boxes lit, the greater the sensitivity).

Drag a grid(s) over the area(s) on the image that will be sensitive to motion.

Click Settings Set to configure Arming Schedule (when detection is enabled) and Linkage

Actions (what action(s) to take when motion is detected).



















 TYPE

Motion or Continuous (default)

 COLOR

Shows Recording Schedule days:

• Blue=Continuous

• Yellow=Event (motion/alarm)

• Grey=None

 TIMES

Customize schedule times (ignore for

"motion only" recording)

 ADD

Press to add time settings to

schedule

 ENABLE SCHEDULE

Camera will not record unless

checked

 CAMERA (Select)

ENABLE MOTION DETECTION

Click to enable/disable

 MOTION GRID (Draw motion area)

SENSITIVITY

Set green squares for sensitivity

 SETTINGS/SET

Arming schedule & linkage actions

APPLY

