Makita 4341FCT 하드웨어 기술 정보 - 페이지 6
{카테고리_이름} Makita 4341FCT에 대한 하드웨어 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4341FCT 14 페이지. Jig saw
Makita 4341FCT에 대해서도 마찬가지입니다: 사양 (2 페이지), 부품 분석 (3 페이지), 사용 설명서 (13 페이지)
페이지 인쇄
R
epair
5. Assemble stop ring E-3 to pin 4 as illustrated in Fig. 10.
Check, whether slider can reciprocate on linear guide smoothly, or not.
If slider does not reciprocate smoothly, incorrectly assembled linear guides can interfere with slider
in reciprocating. Try again to assemble linear guides correctly.
Linear guide
6. Lubricate the parts assembled in gear housing cover with referring to "< 1 > Lubrication " at page 2.
7. Aligning slider to needle bearing 407 on crank complete, assemble gear housing cover section to gear housing
as illustrated in Fig. 11. Do not forget to assemble packing between gear housing cover and gear housing.
See Fig. 11A.
Slider
Gear housing
cover
Slider
Pin 4
Rod
Needle bearing 407
Align slider to needle bearing 407
on crank complete
4 pcs. of
Tapping screws CT 4 x 16
Safety wire
4341T, 4341CT, 4341FCT
Stop ring E-3
Fig. 10
Crank complete
Balance plate
Gear housing
Fig. 11
Gear housing cover
Packing
Fig. 11A
P 6 / 14