Makita 4341FCT 하드웨어 기술 정보 - 페이지 9

{카테고리_이름} Makita 4341FCT에 대한 하드웨어 기술 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4341FCT 14 페이지. Jig saw
Makita 4341FCT에 대해서도 마찬가지입니다: 사양 (2 페이지), 부품 분석 (3 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

epair

<10 > Assembling parts in gear housing

1. Assemble flat washer 8 to the shaft in gear housing. See Fig. 21.

2. After assembling seal plate to push plate, assemble them to the shaft in gear housing. See Fig. 22.

3. Lubricate the parts with referring to " < 1 > Lubrication " at page 2.

4. Assemble gear complete and balance plate to the shaft in gear housing. See Fig. 23.

5. Assemble crank complete to gear housing. With turning crank complete, press it down to the position in which

you can see the shaft's groove for retaining ring S-8. See Fig. 24.

6. Lock crank complete with something like 1R235 "round bar for arbor", and fasten crank complete

with 2 pcs. of hex socket head bolts M4 x 12 with adhesive. See Fig. 25.

< Note >

Do not fasten with the used hex socket head bolts M4 x 12. The fresh adhesive hex socket head bolts M4 x 12

have to be used. The fastening torque of these bolts is 2.4 - 3.5 N.m.

7. Assemble retaining ring S-8 to the shaft of gear housing. See Fig. 26.

Flat washer 8

Gear housing

Fig.21

Groove for retaining ring S-8

Crank complete

Press crank complete down to the position where

you can see the shaft's groove for retaining ring S-8.

Fig. 24

Retaining ring S-8

Fig. 26

Push plate

Seal plate

Gear housing

Something like

1R235 "round bar for arbor"

Balance plate

Crank complete

Flat washer 8

Seal plate

Balance plate

Fig.22

Retaining ring S-8

Balance plate

Gear complete

Push plate

P 9 / 14

Gear complete

Gear housing

Fig.23

2 pcs. of hex socket

head bolts M4 x 12

Crank complete

Fig. 25