Makita 4350CT 사용 설명서 - 페이지 9

{카테고리_이름} Makita 4350CT에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4350CT 13 페이지. Jig saw
Makita 4350CT에 대해서도 마찬가지입니다: 사양 (2 페이지), 사용 설명서 (13 페이지), 사용 설명서 (13 페이지), 기술 정보 (14 페이지)

페이지 인쇄
Makita 4350CT 사용 설명서

Dust extraction

► 1 . Dust nozzle 2. Base
The dust nozzle (accessory) is recommended to per-
form clean cutting operations.
To attach the dust nozzle on the tool, insert the hook of
dust nozzle into the hole in the base.
The dust nozzle can be installed on either left or right
side of the base.
Then connect a Makita vacuum cleaner to the dust
nozzle.
1
► 1 . Dust nozzle 2. Hose for vacuum cleaner
CAUTION:
•
If you try to remove the dust nozzle forcibly, the
hook of the dust nozzle can be diminished and
removed unintentionally during operation.
1
2
2
Rip fence set (optional accessory)
CAUTION:
•
Always be sure that the tool is switched off
and unplugged before installing or removing
accessories.

1. Straight cuts

► 1 . Rip fence
1
2
3
► 1 . Hex wrench 2. Bolt 3. Fence guide
When repeatedly cutting widths of 160 mm or less, use
of the rip fence will assure fast, clean, straight cuts. To
install, insert the rip fence into the rectangular hole on
the side of the tool base with the fence guide facing
down. Slide the rip fence to the desired cutting width
position, then tighten the bolt to secure it.
2. Circular cuts
9 ENGLISH
1