HIKVISION DS-7208HUI-K2 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} HIKVISION DS-7208HUI-K2에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-7208HUI-K2 17 페이지.

A D D A N A L O G C A M E R A S

 Adding Analog Cameras

1. Connect analog camera(s) to the "Video In" BNC connectors.

 Adding Analog PoC Cameras

PoC cameras do not require camera power to produce an image on the DVR as they are powered

over-the-coax upon connection.

 Enabling Analog Cameras

2. Analog cameras are enabled by default; no further action is required.

V I E W L I V E V I D E O

Live View displays real-time video.

S E T U P R E C O R D I N G

The system defaults to record video continuously at 8 fps, or at 15 fps when motion is detected.

 Recording Schedule

Default is to record continuously every day. Do the following to change the recording schedule:

1. Go to MENU > RECORDING CONFIGURATION > SCHEDULE.

2. Choose CONTINUOUS or EVENT/(MOTION DETECTION) under the Type pull-down menu.

3. Use cursor to select (days will turn blue [continuous] or yellow [event/motion detect]) or deselect

(days will turn gray [off]) the calendar days you wish to record.

4. Apply time settings as desired.

5. Press APPLY.

Icons in the upper right of screen show each

camera's record and alarm status.

• Alarm (video loss, tampering, motion detection,

sensor alarm, or VCA alarm)

• Record (manual record, continuous record, motion

detection, alarm, or VCA triggered record)

• Event/Exception (event and exception information

appears at lower-left corner of screen)