Avantco Equipment 177MG22R 사용자 설명서 - 페이지 6

{카테고리_이름} Avantco Equipment 177MG22R에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco Equipment 177MG22R 7 페이지.

페이지 인쇄

Operation

Place grinder on a stable and secure surface.

2. Install the sausage stuffing assembly (optional).

NOTE: It is recommended that 2 people perform sausage stuffing.

3. Plug the unit into an appropriate electrical socket (110V/60Hz).

4. Load meat into the food pan.

5. Place a receptacle under the front grinder plate/place prepared casings onto the sausage funnel.

6. Turn the unit on using the green switch.

Gently push the meat into the grinder using the stomper. DO NOT USE HANDS.

8. If stuffing sausage, hold the casing on the sausage tube in one hand and slowly let the meat output

pull the casing from the tube. Fill casing as desired by holding casing back on tube.

NOTE: Adding small amounts of water to the ground meat can improve sausage output.

9. Twist or tie the sausage into links as desired. Knot the end of casing.

Cleaning & Maintenance

NOTE: Cleaning should be done IMMEDIATELY after use.

NOTE: DO NOT immerse the motor body in water.

NOTE: DO NOT place any pieces in a dishwasher.

Turn unit off and remove plug from power source.

2. Separate the head from the body using the thumbscrew located on top of the body.

3. Remove the tray and unscrew the front guard. The grinding plate, auger, and knife may now

be removed.

4. Wash all parts that have come in contact with meat in hot soapy water.

5. Rinse the grinder parts with clean hot water, then dry using a cloth.

6. Fully lubricate the head, plates, and the knife with a food grade silicone spray before and after

each use.

Clean the motor cover and gear housing with a damp towel and quickly wipe dry.

8. Make sure the grinder and all components are completely dry before assembling or storing.

Troubleshooting

Issue

Grinder does not turn on.

www.AvantcoEquipment.com

Possible Problem

DO NOT attempt to repair on your own.

Power cord damaged.

Contact our customer service for assistance.

If circuit breaker is tripped, reset it. If unit continues to trip,

No power to the

then the short circuit needs to be repaired.

outlet.

DO NOT attempt to repair on your own.

Contact our customer service for assistance.

Turn off the unit, wait for 5-10 minutes, then restart.

Thermal switch

If the unit still doesn't work, then it needs to be repaired.

overheats.

Contact our customer service for assistance.

User Manual

Solution

Meat Grinders