Makita 4399DW 사용 설명서 - 페이지 8
{카테고리_이름} Makita 4399DW에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 4399DW 12 페이지. Cordless equine rasp
After use, return the hex wrench to the
storage position.
Switch action
To prevent the trigger from being acciden-
tally pulled, a lock-off lever i s provided.
To start the tool, slide the lock-off lever
in the direction of the arrow and pull the
trigger. Release the trigger to stop.
/
n
\
\
Hex
wrench
A
2
1
I , - , ,
m
Lock-off
~
lever
;
S
w
i
t
c
h
trigger
CAUTION :
Before inserting the battery cartridge into the tool, always check to see that the trigger
switch actuates properly and returns to the "OFF" position when released.
Sterilization of rasp blade, holder and drive shaft
The rasp blade, holder and drive shaft must be sterilized each time the tool is used and
between each horse, to prevent the spread or cross infection of any disease, virus, etc.
They can be sterilized by boiling or in a disinfectant (which will not harm the horse's
health) without removing them from the tool. But it i s recommended rather that the
sterilization be carried out by a suitable sterilizing unit after removal from the tool. In
this case, the hex wrench to be used for assembling them also must be sterilized.
CAUTION :
When sterilizing the rasp blade, holder and drive shaft by boiling or in a disinfectant, be
careful not to splash boiling water or disinfectant on your hands, the tool, etc.
8