Avantco Equipment 177MX20GRNDR 사용자 설명서 - 페이지 4

{카테고리_이름} Avantco Equipment 177MX20GRNDR에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Avantco Equipment 177MX20GRNDR 6 페이지.

User Manual

Assembly Grinder Attachment Cont .

4. Lift the retainer ring and spin it onto the chamber head clockwise to tighten (Fig. 6 & 7).

5. Lift the food pan and insert it onto the chamber head's top (Fig. 8).

6. The grinder attachment is now ready to be loaded to the power source equipment.

Fig. 6

Loading Grinder Attachment onto Hub

1. Before mounting the unit, make sure that the power source equipment is turned off.

2. Carefully lift the assembled unit and insert the square milled shaft end into the hub while turning the unit

to engage the square end on the shaft with the square hole in the adapter (Fig. 9).

3. Slide the unit forward and push the unit fully forward on to the hub. Tighten the thumbscrew to secure the

unit to the hub (Fig. 10).

4. The grinder attachment is now ready to process product (Fig. 11).

Fig. 7

Fig. 9

Fig. 8

Fig. 10

Fig. 11