Makita 5090D 사용 설명서 - 페이지 3
{카테고리_이름} Makita 5090D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5090D 17 페이지. 85mm with fast charger
Makita 5090D에 대해서도 마찬가지입니다: 부품 목록 (1 페이지), 부품 분석 (2 페이지)
페이지 인쇄
16. Outdoor use extension cords. When tool is used outdoors, use only
extension cords intended for outdoor use and so marked.
17. Stay alert. Watch what you are doing. Do not operate tool when you are tired.
18.
Check damaged parts. Before further use of the tool, a guard or other part
that is damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment of moving
parts, binding of moving parts, breakage of parts, mounting, and any other
conditions that may affect tool operation. A guard or other part that is
damaged should be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this instruction manual.
Defective switches should be replaced by an authorized service center. Do not
use tool
if
the switch does not turn the tool
on
and
off.
19. Guard against electric shock. Prevent body contact with grounded surfaces,
for example: pipes, radiators, ranges, refrigerator enclosures.
20. Replacement parts. When servicing, use only identical replacement part.
VOLTAGE WARNING: Before connecting the tool to a power source (receptacle
outlet, etc.) be sure the voltage supplied is the same as that specified on the
nameplate of the tool. A power source with voltage greater than that specified for
the tool can result in SERIOUS INJURY to the user-as well as damage to the tool.
If in doubt, DO NOT PLUG IN THE TOOL. Using a power source with voltage less
than the nameplate rating is harmful to the motor.
IMPORTANT SAFETY INSTRUCTIONS
FOR BAlTERY
1. Always Cover the Battery Terminals with the battery cover when the
battery cartridge is not in use.
2.
Do not short the Battery Cartridge:
i. Do not touch the terminals with any conductive material.
ii.
Avoid storing battery cartridge in a container with other metal objects
such as nails, coins, etc.
iii.
Do not expose battery cartridge to water or rain.
A battery short can
cause a large current flow, overheating, possible burns, and even a
breakdown.
3.
Do not store the tool and Battery Cartridge in locations where the
temperature may reach or exceed 50°C (122°F).
4.
Do not incinerate the Battery Cartridge even if it is severely damaged or
completely worn out. The battery cartridge can explode in a fire.
3