Makita 5090DW 사용 설명서 - 페이지 7

{카테고리_이름} Makita 5090DW에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5090DW 17 페이지. 85mm with fast charger
Makita 5090DW에 대해서도 마찬가지입니다: 부품 목록 (1 페이지)

7 .

10.

11.

12.

Guard Against Kickback. Kickback occurs when the saw stalls rapidly and is

driven back towards the operator. Release switch immediately if blade binds or

saw stalls. Keep blades sharp. Support large panels as shown in Fig. 1. Use

fence or straight edge guide when ripping.

Do not

force tool. Stay alert

exercise control. Do not remove saw from work during a cut while the blade

moving.

NEVER place your hand or

fingers behind the saw. If

kickback occurs, the saw could

easily jump backwards over

your hand, possibly causing

severe injury (see Fig. 3).

Fig.

Lower Guard. Raise lower guard with the retracting handle.

Adjustments. Before cutting be sure depth and bevel adjustments are

tight.

Use Only Correct Blades In Mounting. Do not use blades with incorrect size

holes. Never use defective or incorrect blade washers or bolts.

Avoid Cutting Nails. Inspect for, and remove, all nails from lumber before

cutting.

Operate with proper hand

support and proper workpiece

support (see Fig. 4).

A typical illustration of proper hand

support and workpiece support.

Fig. 4

WARNING:

is important to support the workpiece properly and to hold the saw firmly to

prevent loss of control which could cause personal injury. Fig.

illustrates

typical hand support of the saw.