Makita 5093DWA 사용 설명서 - 페이지 6

{카테고리_이름} Makita 5093DWA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5093DWA 20 페이지. 85 mm (3-3/8”)
Makita 5093DWA에 대해서도 마찬가지입니다: 부품 목록 (2 페이지)

not use dull or damaged blade. Unsharpened or improperly set blades

produce narrow kerf causing excessive friction, blade binding and KICKBACK.

Blade depth and bevel adjusting locking levers must be tight and secure before

making cut. If blade adjustment shifts while cutting,

may cause binding and

KICKBACK.

Use extra caution when making a "Pocket Cut" into existing walls or other

blind areas. The protruding blade may cut objects that can cause KICKBACK.

NEVER place your hand or fingers

behind the saw. If kickback occurs,

the saw could easily jump backwards

over your hand, possibly causing

severe injury.

Fig.

12. Adjustments. Before cutting be sure depth and bevel adjustments are tight.

13. Avoid Cutting Nails. Inspect for and remove all nails from lumber before

cutting.

14.

When operating the saw, keep the

cord away from the cutting area and

position

so that

will not be caught

on the workpiece during the cutting

operation.

Operate w i t h proper hand support,

proper workpiece support,

and

supply cord routing away from the

work area.

WARN

I NG

typical illustration of proper hand

support, workpiece support, and

supply cord routing.

Fig.

It is important t o support the workpiece properly and to hold the saw firmly

t o prevent loss of control which could cause personal injury. Fig. 4 illustrates

typical hand support of the saw.