Ceriotti C3000 조립 지침 매뉴얼 - 페이지 11

{카테고리_이름} Ceriotti C3000에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ceriotti C3000 16 페이지.

IGNITION OF THE APPARATUS

Press green luminous switch place over the control panel.

PROGRAMMING WORKING TIME

Set the working time from 0 to 60 minutes by turning the timer knob (A)

clockwise. When the time has elapsed, the knob returns automatically to the "0"

position. During operation of the apparatus, you can at any moment turn the

knob counter clockwise to take it back to "0", thus using it as a switch.

PROGRAMMING OF TEMPERATURE

Set the desired working temperature by turning the knob (C) of the thermostat

clockwise.

PROGRAMMING OF VENTILATION

Set the desired ventilation from 0 to 4 by turning the knob (B) clockwise.

USE OF THE SWITCHES

Use the switches(D) in order to ignite or to extinguish every single lamp.

NOTE:

- The Company declines all responsibility for any injury to persons or damage to things

caused by installation or assembly that has not been carried out in compliance with the

General Warnings, or using supports and/or accessories other than those manufactured

by us, or for any injury to person or damage to things caused by installation or assembly

that have been carried out by non-specialized or non-authorized staff.

- In the case of the wall-mounted arm, the Company moreover declines all responsability

fo injury or damage resulting from the unsuitabilityof any support made of masonry or

other material.