Makita 5630DWA 사용 설명서 - 페이지 12

{카테고리_이름} Makita 5630DWA에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 5630DWA 20 페이지. Equipped with electric brake
Makita 5630DWA에 대해서도 마찬가지입니다: 부품 목록 (2 페이지)

페이지 인쇄

*If you charge a battery cartridge from a just-operated tool or a battery cartridge which has

been left in a location exposed to direct sunlight or heat for a long time, the charging light

may flash in red color. If this occurs, wait for a while. Charging will begin after the battery

cartridge cools. The battery cartridge will cool faster if you remove the battery cartridge

from the high capacity battery charger.

*If the charging light flashes alternately in green and red color, a problem exists and charg

ing is not possible. The terminals on the charger or battery cartridge are clogged with

dust or the battery cartridge is worn out or damaged.

Removing or installing the saw blade

CAUTION:

Always be sure that the tool is switched off and the battery cartridge is removed before

installing or removing the blade.

To remove the blade, press the shaft lock

so that the blade cannot revolve and use

the hex wrench to loosen the bolt clock-

wise. Then remove the bolt, outer flange

and blade.

To install the blade, follow the removal pro-

cedure in reverse.

BE SURE TO TIGHTEN THE

BOLT

SECURELY.

:wrench

Fig.

Saw blade

Fig. 11

CAUTl ON

*Be sure the blade is installed with teeth pointing up

the front of the tool

*Use only the Makita hex wrench to install or remove the blade.