CORNING Pretium 운영 매뉴얼 - 페이지 5

{카테고리_이름} CORNING Pretium에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CORNING Pretium 10 페이지. Rack-mountable 1u housing hardware

Bracket Orientation for Top Cable Entry

3.5.2

Using Cable Ties

If at least 10 m (33 ft) of outside plant cable is routed within an environmentally controlled building

where temperature fluctuation is minimal, securing the cable sheath is adequate strain-relief.

CAUTION: Wear safety glasses to protect your eyes from accidental injury when

handling chemicals and cutting fiber. Pieces of glass fiber are very sharp and can

damage the eye easily.

CAUTION: Wear safety gloves o protect hands from accidental injury when using

sharp instruments.

Step 1:

Attach the cable to the strain-relief bracket with cable ties in two places as shown in

Figure 6.

Step 2:

Allow room on the bracket to strain-relieve the cable strength member, if present.

STANDARD RECOMMENDED PROCEDURE 003-649 | ISSUE 5 | JANUARY 2009 | PAGE 5 OF 10

Yarn (If Present)

Strength Member

Flat Washer

U-shaped

Washer

Bracket Orientation for Bottom Cable Entry

Cable Ties

KPA-1197

KPA-1196

Figure 5 — Strain-relieve Using UCC

Figure 6 — Strain-relieve Strength Member