JAMEC PEM 11.0734 사용 설명서 - 페이지 2
{카테고리_이름} JAMEC PEM 11.0734에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. JAMEC PEM 11.0734 4 페이지. Dial gauge tyre inflator
페이지 인쇄TDR5000 Tyre Inflator
The new TDR5000 dial tyre Inflator features a
lightweight, durable design and one touch
operation, making it the quickest and easiest
to use handheld tyre inflator in the TDR range,
perfect for industrial workshops, mechanics
and garages. With a tough diecast aluminium
construction encased in a composite body and
an impact absorbing bumper, it will take a real
beating and ensures easy inflation with just the
touch of a trigger.
Features
IP44 rating - tough, durable
■
and splash resistant
Large 80 mm dial gauge
■
Multi scale gauge (bar, psi)
■
Impact absorbing bumper
■
Tough, lightweight diecast aluminium
■
internal body with composite outer casing
Wire sheathed hose to eliminate kinking
■
Supplied with certificate of calibration
■
WARNING
To avoid the risk of personal injury, especially to the eyes, face or skin, DO NOT direct the
air stream at any person, or any part of the body. This equipment is not intended for use by
children without adult supervision. The manufacturer reserves the right to change product
features at any time without notice.
2
Operation
To read pressure:
■
Remove tyre valve cap.
With clip-on air chuck lever depressed,
firmly press chuck onto tyre valve stem
and release lever, ensure that no air leaks.
To inflate:
■
With clip-on air chuck lever depressed,
firmly press chuck onto tyre valve stem
and release lever, ensure that no air leaks.
Fully depress the tyre inflator lever for an
appropriate period of time and release
the lever.
Check pressure gauge and repeat the
procedure until correct pressure level
is achieved.
To deflate:
■
With clip-on air chuck lever depressed,
firmly press chuck onto tyre valve stem
and release lever, ensure that no air leaks.
Depress the tyre inflator lever half way
(until air can be heard to be escaping)
for an appropriate period of time and
release the lever.
Check pressure gauge and repeat the
procedure until correct pressure level
is achieved.
Safety
Never exceed the maximum pressure
■
of the tyre.
Check that the hose and chuck are
■
in good condition with no damage
or cracks.
Ensure safe working environment
■
when using compressed air.
Return to authorised service
■
agent for repair and maintenance.