HIKVISION DS-7300HWI-SH Series 빠른 시작 매뉴얼 - 페이지 10
{카테고리_이름} HIKVISION DS-7300HWI-SH Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-7300HWI-SH Series 11 페이지.
HIKVISION DS-7300HWI-SH Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)
페이지 인쇄
First Choice For Security Professionals
9. Network Connection
Network Connection
Using Web Browsers
All Hikvision products use the default IP address of 192.0.0.64
1. Connect a CAT5 or CAT6 cable from the DVR to a PC or Laptop computer.
Note your laptop or PC computers existing address, such as:
IP:
Subnet:
2. Open web browser.
3. In the address bar, type 192.0.0.64
If prompted, allow the installation of the Hikvision application.
It may be necessary to add this IP address as a Trusted Site with Low Security.
4. Login to the DVR:
Username: admin
Password: 12345
5. Go to the Configuration tab, then Remote Configuration, then [Network Settings]
6. Click on Network Settings.
7. Enter the IP address you wish the DVR to have, then SAVE.
8. Reset your laptop or PC to its original IP address, subnet and gateway.
9. Type the new address in web browser.
Using Hikvision iVMS-4200 client software
If possible, check
http://www.hikvision.com
If internet access is not available, install the software from the CD.
Then follow the instructions included with the software.
192.0.0.62
255.255.255.0
IT IS STRONGLY RECOMMENDED TO CHANGE THE DEFAULT PASSWORD
for the latest version of the iVMS-4200 client software.