Makita 6823 사용 설명서 - 페이지 6
{카테고리_이름} Makita 6823에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6823 12 페이지. Drywall screwdriver
Makita 6823에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 부품 분석 (3 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 사용 설명서 (7 페이지), 사용 설명서 (10 페이지), 기술 정보 (10 페이지)
페이지 인쇄
1
A
B
1. Reversing switch lever
A
1. Hook
ASSEMBLY
1
1. Locator
2. Locking sleeve
6
Reversing switch action
002635
This tool has a reversing switch to change the direction of rotation. Move the
reversing switch lever to the
position (B side) for counterclockwise rotation.
CAUTION:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a complete stop.
Changing the direction of rotation before the tool stops may damage the
tool.
Hook
002644
The hook is convenient for temporarily hanging the tool.
1
When using the hook, pull it out in "A" direction and then push it in "B" direction
to secure in place.
When not using the hook, return it back to its initial position by following the
above procedures in reverse.
002645
B
CAUTION:
•
Always be sure that the tool is switched off and unplugged before
carrying out any work on the tool.
Installing or removing the bit
To remove the bit, first pull the locator out of the locking sleeve. Then grasp
002653
the bit with a pair of pliers and pull the bit out of the magnetic bit holder. Some-
times, it helps to wiggle the bit with the pliers as you pull.
2
position (A side) for clockwise rotation or the