Makita 6824 사용 설명서 - 페이지 7
{카테고리_이름} Makita 6824에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6824 17 페이지. Drywall screwdriver
Makita 6824에 대해서도 마찬가지입니다: 부품 분석 (3 페이지), 부품 분석 (3 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 사용 설명서 (7 페이지), 사용 설명서 (10 페이지), 기술 정보 (10 페이지), 사용 설명서 (12 페이지)
페이지 인쇄
1
A
B
1. Reversing switch lever
A
1. Hook
For continuous operation, pull the switch trigger and then
push in the lock button.
To stop the tool from the locked position, pull the switch trig-
ger fully, then release it.
NOTE:
•
Even with the switch on and motor running, the bit will
not rotate until you fit the point of the bit in the screw
head and apply forward pressure to engage the clutch.
Reversing switch action
002635
This tool has a reversing switch to change the direction of
rotation. Move the reversing switch lever to the
(A side) for clockwise rotation or the
counterclockwise rotation.
CAUTION:
•
Always check the direction of rotation before operation.
•
Use the reversing switch only after the tool comes to a
complete stop. Changing the direction of rotation before
the tool stops may damage the tool.
Hook
002644
The hook is convenient for temporarily hanging the tool.
1
When using the hook, pull it out in A direction and then push
it in B direction to secure in place.
When not using the hook, return it back to its initial position
by following the above procedures in reverse.
002645
B
position
position (B side) for
7