Ikegami HC-400W 운영 매뉴얼 - 페이지 5
{카테고리_이름} Ikegami HC-400W에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ikegami HC-400W 8 페이지. Profesional digital video camera
페이지 인쇄O p e r a t i o n
Integrated VCR Operation
Balanced
design of the HC-400/400W enables use with
the most widely used VCRs. A low-profile VCR
adaptor is placed on the rear panel to enable
integrated VCR operation. Most notable,
DVCPRO50/25 VCR (IR-D90) has been added
to the line.
Setup
Via a viewfinder character menu
system, it is possible to adjust the full
complimet of camera setup parameters.
The design, which includes a bit switch on the
MPU module in the camera for safety, enables
professional users to create their own setups.
Initialize Function
Professionals who care
about their picture creation, are delighted to
find that the number of items they can set has
been increased. However, the more the items
that can be set, the more likely mistakes are
made. This is where the initialize function can
be depended upon. Selection of "initialize" in
the menu enables users to easily return to the
initial settings (as set at factory). This is a
useful function if the HC-400/400W will be used
by a number of cameramen or when the
camera needs to be reset.
1.5 inch VF
The camera includes a 1.5-inch
VF that ensures crisp, stable images using a
high resolution CRT. A quick-start tube and
other features ensures easy operation.
In particular, a lens light supports manual iris
operation in dimly lit environments. Two types
of zebra signals can be selected depending on
the image, allowing content based on overall
picture brightness or content based on flesh
tone brightness of the talent's face.
Substantial Character Display
All conditions under which the cameraman is
operating can be displayed on the VF and
easily set using a menu format.
Memory Function
In addition to 3,200K
preset automatic white balance settings, the
HC-400/400W comes with two sets of memory,
A and B. With four channels of scene files,
users can quickly change settings.
Memory Card Function (HC-400W)
Camera setup can be recorded onto a memory
card (SmartMedia) for recall at later time or
transfer to another camera.
Lens File
Professional cameramen are very
much concerned about differences in the
optical characteristics of lenses. Eight lens
files can be preset to reduce the amount of
time required for adjustment when lenses are
changed.
Filters
The camera comes with four built-in
optical filters. The 5600K filter includes both a
1/16 ND and 1/64 ND. This enables standard
filters to be used even in the middle of the day
when light contrast is the highest.
Batteries
Battery life is a major concern
when shooting outdoors. The HC-400/400W
comes with a voltage alarm function where a
voltage indicator flashes when the battery
voltage drops below a set value.
Shoulder Pad
The shoulder pad on the HC-
400/400W has a flexible design that allows for
front and back adjustment.
The incline of the shoulder pad can be also
adjusted.
GEN LOCK
A GEN LOCK connector is
provided on the camera head for system
integration. This is useful when using a
dockable VCR, and genlock is required.
Catering for Studio Production
IN connector for the CA-400/450 camera
adaptor and the VCR connector are angled 45°
to ensure that the associated cables will not
interfere with operation of the camera on a
tripod. To support use in the studio, there is a
5-inch VF, and camera control unit.
Especially, by the conbination with MA-400*,
Ikegami's latest camera control unit, HC-
400/400W supports SDI output and Q-TV
signal as options. And also, a variety of remote
control units are available.
* In case of operation with MA-400, CA-450 is needed.
Rear Panel Adaptor System
EX
A: 3.3K B:4.1K
+F
F1.8
+6dB
A A 0:00:00
VF Character Display
Adjustable Shoulder Pad
HC-400(with CA-450)
Camera Control Unit MA-400
The DC
Studio Use
S#-
F-15
1/100