Makita 6906 사용 설명서 - 페이지 6

{카테고리_이름} Makita 6906에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6906 8 페이지. Makita 6906 impact wrench: specifications
Makita 6906에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지), 부품 분석 (3 페이지), 사용 설명서 (8 페이지), 사용 설명서 (20 페이지), 사용 설명서 (7 페이지)

페이지 인쇄

The fastening torque is affected by a wide variety of

factors including the following. After fastening, always

check the torque with a torque wrench.

Voltage

Voltage drop will cause a reduction in the fastening torque.

Socket

•

Failure to use the correct size socket will

cause a reduction in the fastening torque.

•

A worn socket (wear on the hex end or

square end) will cause a reduction in the

fastening torque.

Bolt

•

Even though the torque coefficient and the class

of bolt are the same, the proper fastening torque

will differ according to the diameter of bolt.

•

Even though the diameters of bolts are the

same, the proper fastening torque will differ

according to the torque coefficient, the class

of bolt and the bolt length.

The use of the universal joint or the extension

bar somewhat reduces the fastening force of the

impact wrench. Compensate by fastening for a

longer period of time.

The manner of holding the tool or the material of

driving position to be fastened will affect the torque.

MAINTENANCE

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before attempting to perform inspec-

tion or maintenance.

•

Never use gasoline, benzine, thinner, alcohol

or the like. Discoloration, deformation or cracks

may result.

Replacing carbon brushes

► 1. Limit mark

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps.

Take out the worn carbon brushes, insert the new ones

and secure the brush holder caps.

► 1. Screwdriver 2. Brush holder cap

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL

ACCESSORIES

•

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

•

NOTE: Some items in the list may be included in the

tool package as standard accessories. They may

differ from country to country.

6 ENGLISH

CAUTION:

These accessories or attachments are recom-

mended for use with your Makita tool specified

in this manual. The use of any other accessories

or attachments might present a risk of injury to

persons. Only use accessory or attachment for

its stated purpose.

Sockets

Extension bar

Universal joint