Makita 6918D 사용 설명서 - 페이지 7

{카테고리_이름} Makita 6918D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6918D 13 페이지. Cordless impact wrench

ASSEMBLY

1. Socket

2. Anvil

1. Socket

2. O-ring

3. Pin

CAUTION:

•

Always be sure that the tool is switched off and the battery cartridge is

removed before carrying out any work on the tool.

Selecting correct socket

Always use the correct size socket for bolts and nuts. An incorrect size socket

will result in inaccurate and inconsistent fastening torque and/or damage to the

bolt or nut.

Installing or removing socket

002341

For socket without O-ring and pin

To install the socket, push it onto the anvil of the tool until it locks into

place.

To remove the socket, simply pull it off.

For socket with O-ring and pin

005225

Move the O-ring out of the groove in the socket and remove the pin from

the socket. Fit the socket onto the anvil of the tool so that the hole in the

socket is aligned with the hole in the anvil. Insert the pin through the hole

in the socket and anvil. Then return the O-ring to the original position in

the socket groove to retain the pin. To remove the socket, follow the

installation procedures in reverse.