Makita 6991D 사용 설명서 - 페이지 6

{카테고리_이름} Makita 6991D에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 6991D 16 페이지. 9.6v cordless impact wrench
Makita 6991D에 대해서도 마찬가지입니다: 사용 설명서 (17 페이지), 기술 정보 (5 페이지)

Makita 6991D 사용 설명서
IMPORTANT SAFETY INSTRUCTIONS
FOR CHARGER &
BATTERY CARTRIDGE
1.
SAVE THESE INSTRUCTIONS
- This manual
Length of Cord (Feet)
AWG Size of Cord
contains important safety and operating instructions for battery charger.
2.
Before using battery charger, read all instructions and cautionary markings
on (1) battery charger, (2) battery, and
(3)
product using battery.
3.
CAUTION
-
To reduce risk of injury, charge only MAKITA rechargeable
batteries marked on the charger label. Other types of batteries may burst
causing personal injury and damage.
4.
Do
not expose charger t o rain or snow.
5. Use of an attachment not recommended or sold by the battery charger
manufacturer may result in a risk of fire, electric shock, or injury t o persons.
6.
To reduce risk of damage t o electric plug and cord, pull by plug rather than
cord when disconnecting charger.
7. Make sure cord is located so that
it
will not be stepped on, tripped over, or
otherwise subjected t o damage or stress.
8.
A n extension cord should not be used unless absolutely necessary. Use of
improper extension cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
a. That pins o n plug of extension cord are the same number, size, and shape
b. That extension cord is properly wired and in good electrical condition; and
c. That wire size is at least as large as the one specified in the table below.
TABLE
1
RECOMMENDED MINIMUM AWG SIZE
FOR
as those o f plug on charger;
25
50
100
150
18
18
18
16
EXTENSION CORDS
FOR
BATTERY CHARGERS
6