HIKVISION DS-7316HUHI-K4 빠른 시작 매뉴얼 - 페이지 11

{카테고리_이름} HIKVISION DS-7316HUHI-K4에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. HIKVISION DS-7316HUHI-K4 17 페이지.

3.7 Adding IP Cameras

Purpose

Before you can get live video or record the video files, you should add the network cameras to the connection

list of the device.

Before you start

Ensure the network connection is valid and correct, and the IP camera to add has already been activated. Please

refer to the User Manual for activating the inactive IP camera.

Step 1 Go to Menu > Camera > IP Camera.

Step 2 Select the IP camera from the list and

click

to add the camera (with the

same admin password of the DVR's).

Step 3 (Optional) Check Enable H.265 (For

Initial Access) for the connected IP

camera supporting H.265. Then the IP

camera will be encoded with H.265.

Purpose

Some models support PoC (Power over Coaxitron) cameras connection. DVR will detect the connected PoC

cameras automatically, manage the power consumption via the coaxial communication, and provide power to

the cameras via coaxitron.

Before you start

Connect the PoC camera to the DVR.

Step 1 Go to Menu > Camera > PoC Information.

Step 2 Check the status of connected PoC camera.

 If the power consumption of

the DVR is lower than that of

AF camera, when AF or AT

camera is connected, there is

no video and "Insufficient

Digital Video Recorder Quick Start Guide

Figure 3-8 PoC Information

 If the power consumption of the

DVR is higher than that of the AF

camera and lower than that of

the AT camera, when AF camera

is connected, it is powered on

Figure 3-7 Add IP Camera

 If the power consumption of

the DVR is higher than that of

the AT camera, when AF or AT

camera is connected, it is

powered on normally.