Makita 7104L 사용 설명서 - 페이지 5

{카테고리_이름} Makita 7104L에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 7104L 13 페이지. 12-1/4" planer, blade sharpener, plate joiner, chain mortiser, blower, heat gun
Makita 7104L에 대해서도 마찬가지입니다: 부품 설명서 (4 페이지), 브로셔 (1 페이지), 기술 정보 (8 페이지), 사용 설명서 (13 페이지)

페이지 인쇄

FUNCTIONAL

DESCRIPTION

1. Wing bolt

2. Stopper pole

3. Stopper

1. Lock-off button

2. Switch trigger

ASSEMBLY

1. Adjusting screw

2. Chain bar

3. Chain cover

4. Hex bolt

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Adjusting depth of cut

005999

Loosen the wing bolt on the stopper. Move the stopper to the desired position

and tighten the wing bolt. When tightened, the tip of the wing bolts should con-

tact the flat surface of the stopper pole. The numbers indicated on the stopper

pole are in cm units (3 mm per graduation).

Switch action

006300

CAUTION:

•

Before plugging in the tool, always check to see that the switch trigger

actuates properly and returns to the "OFF" position when released.

To prevent the switch trigger from being accidentally pulled, a lock-off button is

provided. To start the tool, push in the lock-off button and pull the switch trig-

ger. Release the switch trigger to stop.

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

carrying out any work on the tool.

Installing or removing cutter chain

006290

WARNING:

•

Always be sure that the tool is switched off and unplugged before

installing or removing the cutter chain.

•

Always close the chain cover after installing, removing or adjusting the

cutter chain.

To install the cutter chain, open the chain cover. Loosen the hex bolt securing

the chain bar and the adjusting screw.