Makita 8450 사용 설명서 - 페이지 2
{카테고리_이름} Makita 8450에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 8450 12 페이지. Hammer drill
페이지 인쇄SPECIFICATIONS
Model
Capacities
No load speed (min
Blows per minute
Overall length
Net weight
Safety class
• Due to our continuing programme of research and development, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
SYMBOLS
The following show the symbols used for the tool. Be
sure that you understand their meaning before use.
...................Read instruction manual.
...................DOUBLE INSULATION
..................Only for EU countries
Do not dispose of electric equipment
together with household waste mate-
rial!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its imple-
mentation in accordance with
national law, electric equipment that
have reached the end of their life
must be collected separately and
returned to an environmentally com-
patible recycling facility.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
2
Concrete
Steel
Wood
-1
)
END201-2
8450
15 mm
13 mm
25 mm
0 - 2,800
0 - 44,800
299 mm
1.7 kg
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 97 dB (A)
sound power level: 110 dB (A)
– Wear ear protection. –
The typical weighted root mean square acceleration
2
value is 11 m/s
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product
is in compliance with the following standards of stand-
ardized
documents,
EN61000 in accordance with Council Directives, 73/23/
EEC, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE 2003
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
8451
15 mm
13 mm
25 mm
0 - 2,800
0 - 44,800
299 mm
1.7 kg
/II
.
HD400,
EN50144,
Director
8452
15 mm
13 mm
25 mm
2,800
44,800
299 mm
1.7 kg
EN55014,