Makita 8452 사용 설명서 - 페이지 5

{카테고리_이름} Makita 8452에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 8452 12 페이지. Hammer drill

FUNCTIONAL

DESCRIPTION

1. Switch trigger

2. Lock button

1. Reversing switch lever

CAUTION:

•

Always be sure that the tool is switched off and unplugged before

adjusting or checking function on the tool.

Switch action

004194

CAUTION:

•

Before plugging in the tool, always check to see that the switch trigger

actuates properly and returns to the "OFF" position when released.

For Model 8450, 8451

To start the tool, simply pull the switch trigger. Tool speed is increased by

increasing pressure on the switch trigger. Release the switch trigger to stop.

For continuous operation, pull the switch trigger and then push in the lock but-

ton.

To stop the tool from the locked position, pull the switch trigger fully, then

release it.

For Model 8452

To start the tool, simply pull the switch trigger. Release the switch trigger to

stop.

For continuous operation, pull the switch trigger and then push in the lock but-

ton.

To stop the tool from the locked position, pull the switch trigger fully, then

release it.

Reversing switch action

For Model 8450, 8451

002410

This tool has a reversing switch to change the direction of rotation. Move the

reversing switch lever to the

position (B side) for counterclockwise rotation.

CAUTION:

•

Always check the direction of rotation before operation.

•

Use the reversing switch only after the tool comes to a complete stop.

Changing the direction of rotation before the tool stops may damage the

tool.

position (A side) for clockwise rotation or the