Makita 9207SPB 사용 설명서 - 페이지 9

{카테고리_이름} Makita 9207SPB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 9207SPB 17 페이지. Polisher
Makita 9207SPB에 대해서도 마찬가지입니다: 사용 설명서 (12 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지)

페이지 인쇄
Makita 9207SPB 사용 설명서
1. Limit mark
1. Screwdriver
2. Brush holder cap
ACCESSORIES

Replacing carbon brushes

001145
Remove and check the carbon brushes regularly. Replace
when they wear down to the limit mark. Keep the carbon
brushes clean and free to slip in the holders. Both carbon
brushes should be replaced at the same time. Use only iden-
tical carbon brushes.
1
Use a screwdriver to remove the brush holder caps. Take out
003481
the worn carbon brushes, insert the new ones and secure
the brush holder caps.
1
To maintain product SAFETY and RELIABILITY, repairs, any
2
other maintenance or adjustment should be performed by
Makita Authorized or Factory Service Centers, always using
Makita replacement parts.
CAUTION:
•
These accessories or attachments are recommended for
use with your Makita tool specified in this manual. The
use of any other accessories or attachments might
present a risk of injury to persons. Only use accessory
or attachment for its stated purpose.
If you need any assistance for more details regarding these
accessories, ask your local Makita service center.
•
Abrasive discs
•
Wool bonnet 180
•
Rubber pad 170
•
Sanding lock nut 5/8 - 48
•
Lock nut wrench 28
•
Wrench 17
9