Makita 9911 사용 설명서 - 페이지 4
{카테고리_이름} Makita 9911에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita 9911 17 페이지. 76mm
Makita 9911에 대해서도 마찬가지입니다: 부품 분석 (3 페이지), 사용 설명서 (13 페이지), 사용 설명서 (8 페이지), 사용 설명서 (8 페이지), 기술 정보 (5 페이지), 사용 설명서 (17 페이지)
페이지 인쇄
SERVICE
23. Tool service must be performed only by
qualified repair personnel. Service or main-
tenance performed by unqualified personnel
could result in a risk of injury.
USE PROPER EXTENSION CORD: Make sure your extension cord is in good condition.
When using an extension cord, be sure to use one heavy enough to carry the current your
product will draw. An undersized cord will cause a drop in line voltage resulting in loss of
power and overheating. Table 1 shows the correct size to use depending on cord length and
nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage num-
ber, the heavier the cord.
Ampere Rating
More Than
0
6
10
12
4
Table 1: Minimum gage for cord
Not More Than
6
10
12
16
24. When servicing a tool, use only identical
replacement parts. Follow instructions in
the Maintenance section of this manual.
Use of unauthorized parts or failure to follow
Maintenance instructions may create a risk of
electric shock or injury.
Volts
Total length of cord in feet
120 V
25 ft.
18
18
16
14
50 ft.
100 ft.
AWG
16
16
16
14
16
14
12
Not Recommended
150 ft.
14
12
12