Makita AT422AZ 사용 설명서 - 페이지 5

{카테고리_이름} Makita AT422AZ에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita AT422AZ 7 페이지.

AIR COMPRESSOR AND CONNECTIONS

NOTE：The air pressure required depends on fastener size and type of material to be stapler. Never exceed

the air pressure recommended by specifications.

If stapler do not drive down tightly, adjust to a higher pressure setting until satisfactory. Reduce air pressure

if the fasteners are being driven too deeply.

Adding Quick Connector on the stapler and Quick coupler on the air hose can improve performance.

WARNING OF DRIVING STAPLES

During the process of assembling the AIR HOSE, do not put your finger into the TRIGGER.

l It could cause the risk with an unexpected firing

Please get the DRIVER GUIDE tight on woods and then driving the TRIGGER.

l The staples can be driven with the driving the TRIGGER

OPERATING THE STAPLER

Add a few drops of high speed spindle oil or air tool oil into the air inlet.

Check the operation of the trigger, and load stapler into the magazine.

Connect the stapler to the air compressor.

Test the depth of stapler by driving stapler into a sample piece of wood. If the stapler do not reach the desired

depth, adjust the air pressure.