Makita AT638A 사용 설명서 - 페이지 7

{카테고리_이름} Makita AT638A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Makita AT638A 13 페이지. Narrow crown stapler
Makita AT638A에 대해서도 마찬가지입니다: 사용 설명서 및 사용자 설명서 (13 페이지)

페이지 인쇄

► 1 . Nose adapter 2. Contact element

A spare nose adapter is stored in the place shown in

the figure.

► 1 . Spare nose adapter

Connecting air hose

► 1 . Air fitting 2. Air socket

Slip the air socket of the air hose onto the air fitting on

the stapler. Be sure that the air socket locks firmly into

position when installed onto the air fitting.

A hose coupling must be installed on or near the tool in

such a way that the pressure reservoir will discharge at

the time the air supply coupling is disconnected.

OPERATION

working order before operation.

Selecting the operation mode

tion mode selector is properly set to the position

for the desired stapling mode before stapling.

► 1 . Actuation mode selector

Single sequential actuation mode:

You can drive one staple by one sequential operation.

Select this mode when driving a staple carefully and

accurately.

To choose this mode, set the actuation mode selector to

the

Contact actuation mode:

You can drive staples repetitively by placing the contact

element with the trigger held.

To choose this mode, set the actuation mode selector to

the

Single sequential actuation

Place the contact element against the workpiece and

pull the trigger fully.

After stapling, release the contact element, and then

release the trigger.

7 ENGLISH

CAUTION:

Make sure all safety systems are in

CAUTION:

Always make sure that the actua-

position.